Open 24 h · We arrive in 15-20 minutes · 675 72 75 28Locksmiths in Málaga since 2015 · Based in Cruz de Humilladero
Emergencies

Key broken inside the lock: what to do and what not to do

If your key has broken inside the lock, do not push the other half in or try to turn it. If the piece is sticking out, you can pull it out with fine tweezers, pulling straight. If it is sunk inside, a locksmith extracts it with specialist tools and, in most cases, the cylinder still works afterwards.

Key broken inside the lock: what to do and what not to do

Why does a key break inside a lock?

A key hardly ever breaks out of the blue. It is usually the end of a process that gives warning signs. On our emergency call-outs these are the causes we see most often:

  • A worn or dirty cylinder: the key goes in and turns with difficulty, and every day a bit more force is used.
  • A badly cut copy: poorly made copies force you to strain when turning.
  • Metal fatigue: after years of use the metal weakens, especially at the neck where the blade meets the head.
  • A misaligned door: if the bolts rub against the frame, the strain is passed on to the key.
  • Salt corrosion: on the coast, in areas such as Huelin or in Rincón de la Victoria and Torremolinos, the sea air stiffens mechanisms faster.

What should I do the moment the key breaks?

  1. Stop turning. Any movement can push the piece further in.
  2. See whether the fragment is sticking out of the keyway.
  3. Keep the other half. It helps identify the model and can be used to cut a copy if the cylinder is still in good shape.
  4. Check whether the door is open or closed. If you are inside and the door opens, it is not urgent; if you are outside, you need a door opening.

Can I get the broken piece out myself?

Only if the fragment is clearly sticking out. In that case, use fine-tipped tweezers to grip the piece and pull in a straight line, without twisting. Beforehand, if the cylinder is turned, it can help to bring it back to its resting position, which is the same position you insert the key in normally.

If the piece is sunk inside, do not try. The tricks doing the rounds online (glue, saw blades, paperclips) usually end up worse than they started:

DIY trickWhat usually happens
Glue on the broken halfThe glue drips inside and jams the pins
Using the other half to pushThe piece sinks even further
Paperclips or hairpinsThey bend, snap and add to the problem
Lots of lubricantIt drags dirt in and makes extraction harder

How does a locksmith remove a broken key?

With key extractors, very thin toothed blades slid in alongside the fragment that hook its cuts and draw it out. It is a job that takes patience and a light touch: the aim is not to damage the cylinder's pins. If the key broke with the cylinder turned, it first has to be returned to its position before the piece can be extracted.

When the door is locked and the broken key stops the cylinder being worked, a door opening is carried out using the least damaging technique, and then the fragment is removed calmly.

Does the cylinder need replacing afterwards?

Not always. If the piece comes out whole and the cylinder turns smoothly with a good key, it can carry on working. But it is worth replacing when:

  • The cylinder was already stiff before the key broke.
  • Pins were damaged during extraction or the turn is no longer smooth.
  • It is an old cylinder with no anti-bump or anti-pick protection.
  • It had to be forced and is marked on the outside.

In those cases it makes sense to use the visit for a lock cylinder replacement with one certified to the UNE-EN 1303 standard. If you want to know the signs that your cylinder is reaching the end of its life, read when to change your lock cylinder.

What if the key broke in the building entrance door?

It is very common in communities of owners in Málaga: lots of people use the same lock every day, with all sorts of copies, so wear is greater. Tell the president or the property administrator so other neighbours stop trying it and make the jam worse. For entrance doors, garages and storage rooms we offer locksmith services for residential buildings.

How do I stop a key breaking again?

  • Never force the turn. If the key is stiff, the problem is the cylinder or the door, not your strength.
  • Use good-quality copies or, better still, the original key for daily use.
  • Clean and lubricate the cylinder with a dedicated dry lubricant, not oils that collect dust.
  • Check the door: if you have to push or lift it to close, it needs adjusting.
  • Replace the key when you notice the metal is bent or the blade is worn.
  • On the coast, check the cylinder more often because of the salt air.

When should I call a locksmith?

Call us if the piece is not sticking out, if you are outside with the door locked or if, after getting it out, the cylinder does not turn normally. We reach most neighbourhoods of Málaga in 15-20 minutes, extract the key without damaging the cylinder whenever possible and, if it needs replacing, do it on the same visit. You will find more details on our door opening service page.

Frequently asked questions

Can the cylinder still be used after a broken key is removed?

Often, yes. If the piece comes out whole and the cylinder turns smoothly with a key in good condition, it can carry on working. If it was already stiff or has been damaged, it is better to replace it.

Does glue work for getting a broken key out?

It is not a good idea. The glue tends to drip inside the cylinder and jam the pins, and then the only option left is to replace the cylinder.

What should I do with the other half of the key?

Keep it. It helps the locksmith identify the cylinder model and, if the cylinder is still in good shape, it can be used as a reference to cut a new copy.

Why do keys break?

Usually because of a worn cylinder, poorly cut copies, misaligned doors that force you to strain when turning, or metal fatigue after years of use. On the coast, salt air speeds up the wear.

Can the door be opened if the broken key stops another one going in?

Yes. The door is opened using the least damaging technique and, once it is open, the fragment is removed calmly.

Related services

24-hour emergencies

Need a locksmith in Málaga right now?

Call or WhatsApp us on 675 72 75 28. We reach any neighbourhood in Málaga, Rincón de la Victoria, Torremolinos, Alhaurín de la Torre and Cártama in 15-20 minutes, 24 hours a day.

CallWhatsApp