Open 24 h · We arrive in 15-20 minutes · 675 72 75 28Locksmiths in Málaga since 2015 · Based in Cruz de Humilladero
Service in Málaga · 24 h

Armoured lock guards in Málaga: protect the cylinder where burglars attack

We fit armoured lock guards and cylinder protectors in Málaga to stop the cylinder being snapped, drilled or broken.

From €150Lock guard and fitting. Depending on the model; we give you a fixed price before we start.

An armoured lock guard in Málaga is the steel security escutcheon fitted on the outside of the door, around the lock cylinder, to stop anyone gripping, snapping or drilling it. It is one of the security upgrades with the best ratio of effort to result: it is fitted in one visit, does not mean replacing the door and blocks the most common break-in methods used today.

At AYG Cerrajeros we fit them on security doors, armoured doors and reinforced wooden doors throughout Málaga city and in Rincón de la Victoria, Torremolinos and Cártama. Tell us on WhatsApp what door you have, ideally with a photo of the lock from outside, and we will advise you on the right model.

Gold DISEC armoured lock guard with a rotating disc that protects the cylinder
Armoured lock guards in Málaga · AYG Cerrajeros

What is an armoured lock guard for?

The lock cylinder is the most exposed part of any door. If it sticks out from the face of the door, even by a few millimetres, it can be gripped with a tool and snapped at its weakest point; this is known as cylinder snapping or extraction. Once broken, the lock can be worked from outside very quickly and with hardly any noise.

An armoured lock guard covers the cylinder with a hardened steel piece that spins freely if someone tries to grip it, leaving only the keyhole visible. Many models also have a magnetic cover or anti-drill protection, so it cannot be attacked with a drill bit either.

Armoured lock guard and lock cylinder: a team

A lock guard cannot work miracles if the cylinder is weak, and an excellent cylinder is let down without a guard to protect it. That is why we usually suggest both at once: an anti-bump, anti-pick and anti-snap cylinder, with a high grade under the UNE-EN 1303 standard, and a guard that covers it completely.

Size also matters. The cylinder should not stick out further than necessary on the outside face, and the guard has to sit flush so there is no gap to get a crowbar in. If your current cylinder is not the right size, we sort it out with a lock cylinder change on the same visit.

Types of lock guard we fit

  • Armoured lock guard with rotor: the outer piece spins freely, so grips or a pipe wrench find nothing to get purchase on.
  • Lock guard with magnetic cover: the keyhole is hidden and only opens with a coded magnetic key, which prevents picking and bumping.
  • Anti-drill lock guard: with hardened inserts that break drill bits.
  • Surface-mounted lock guard for wooden doors: fixed through the door with through bolts from the inside.
  • Lock guard for security doors: in formats and sizes compatible with the plates of the main security door locks.

The models we use come from manufacturers such as Tesa, JMA, Azbe, Cisa, FAC and Abloy, depending on what best suits your lock.

Which homes in Málaga benefit most from a lock guard?

We see it every day in the 60s and 70s blocks of the western district, in areas such as Carretera de Cádiz, Huelin or La Unión: security doors fitted twenty or thirty years ago with the original cylinder sticking out several millimetres and a decorative plate that protects nothing. It is exactly the kind of door that cylinder snappers look for.

In the Historic Centre the problem is usually different: old buildings with very thick, heavily used wooden doors, or flats refurbished as holiday lets where people are constantly coming and going. There a lock guard with a magnetic cover adds a lot, because it makes tampering harder even for someone who has had access to a copy of the key for a while.

How the fitting works

First we remove the escutcheon or plate you have, measure the cylinder and check that the lock works without forcing. If the cylinder sticks out too far or has no protection, we change it. Then we fit the outer guard and its inner back plate, joined with through bolts that can only be undone from inside the home.

We finish by testing the key several times, with the door open and closed, to make sure the guard does not rub and the key still turns smoothly. On wooden doors we reinforce the area if we see the door is too thin to take the pressure of the bolts.

Signs that your door needs a lock guard

  • The cylinder sticks out: if you can feel the cylinder beyond the plate when you run your finger over it, it is vulnerable to snapping.
  • You have a thin brass escutcheon: it looks nice, but offers no resistance at all.
  • There have been attempts in the building: marks on the neighbours' locks or on the entrance door.
  • You live on the ground or first floor: these are the homes with the most break-in attempts.
  • Your flat is empty for long periods: a holiday home, long trips or a rental between stays.

Armoured lock guard or simple cylinder protector?

On the market, very different products are sold as lock guards. A simple cylinder protector is a steel piece that covers the cylinder and stops it being gripped easily, but it is usually fixed and does not always withstand an attack with tools. A proper armoured lock guard combines hardened steel, a spinning rotor, anti-drill protection and, in many cases, a magnetic cover, and is anchored to an inner back plate.

The difference shows in how long it holds out against a snapping attempt, which is what really matters: the longer a burglar takes, the more likely they are to give up. For a storeroom or meter room door a simple protector may be enough; for the front door of your home, especially on a ground floor, first floor or penthouse, we recommend a full armoured lock guard.

We show you both options in the van so you can see and feel the difference before deciding, with no obligation and a clear explanation of what each one offers.

What if I want to go further than a lock guard?

The lock guard protects the most attacked point, but a door's security is the sum of its parts. If your door is wooden and only locks at one point, the next logical step is to add a security deadbolt. If the lock is tired or an old model, a lock change to a multipoint lock may be worthwhile.

We suggest things in order of importance without pushing you into anything: first whatever reduces the risk most and then, if you want, the rest. You can check guidance on our prices page.

How we work

We check your cylinder

We measure how far the cylinder sticks out and check the condition of the lock before choosing the guard.

We fit the guard and cylinder

We fit the guard with through bolts and, if needed, a security cylinder of exactly the right size.

We test the whole set

We check that the key turns smoothly and that there is no gap left to lever against.

Frequently asked questions about armoured lock guards

How much does it cost to fit an armoured lock guard?

Fitting an armoured lock guard costs from €150, guard included. The final price depends on the model and the door, and we give you a fixed price before we start. We give you an invoice.

Does an armoured lock guard work on any door?

It works on the vast majority: security doors, armoured doors and wooden doors of sufficient thickness. On very thin doors we first assess whether the door should be reinforced.

Do I have to change the lock cylinder when fitting a lock guard?

Not always, but it is advisable if your cylinder is basic or sticks out too far. The guard really pays off when it protects a security cylinder of the right size.

What is the magnetic cover on some lock guards?

It is a cover over the keyhole that only opens with a coded magnetic key. It stops picks or bump keys from being inserted.

Can the lock guard be seen from the landing?

Yes, it is visible from outside, and that is also a deterrent: anyone looking for an easy door usually walks past when they see an armoured lock guard.

Can a lock guard be fitted on the door of a holiday let in the Centre?

Yes, and it is highly recommended given the constant turnover of guests. A lock guard with a magnetic cover makes it harder to use copies or tamper with the cylinder.

How long does it take to fit a lock guard?

It is a one-visit job. If we also change the lock cylinder, we do it at the same time and leave you the new keys.

Areas

Armoured lock guards in your area

We offer this service throughout Málaga and in Rincón de la Victoria, Torremolinos, Alhaurín de la Torre and Cártama, with 24-hour emergency call-outs from our base in Cruz de Humilladero.

24-hour emergencies

Need a locksmith in Málaga right now?

Call or WhatsApp us on 675 72 75 28. We reach any neighbourhood in Málaga, Rincón de la Victoria, Torremolinos, Alhaurín de la Torre and Cártama in 15-20 minutes, 24 hours a day.

CallWhatsApp