Open 24 h · We arrive in 15-20 minutes · 675 72 75 28Locksmiths in Málaga since 2015 · Based in Cruz de Humilladero
Security

When to change your lock cylinder: 7 clear signs

You should change the lock cylinder if you have lost your keys, you move into a new home, the key is hard to turn or your cylinder has no anti-bump or anti-snap protection. It is the quickest and cheapest security upgrade: only the cylinder is replaced, without touching the lock or the door.

When to change your lock cylinder: 7 clear signs

What is a lock cylinder and why does it wear out?

The lock cylinder, sometimes called the barrel, is the part of the lock you put the key into. Inside it are a series of pins or locking elements that only line up with the right key, letting the plug turn and move the bolts. It is, in other words, the part that decides who gets in and who does not.

Like any precision mechanism, it suffers from daily use, dust, damp and badly cut copies. It is also the target of almost every method of illegal entry. That is why a cylinder can ‘work’ perfectly and still have stopped being secure years ago.

What are the signs that the lock cylinder needs changing?

On our emergency call-outs in Málaga we always see the same warning signs beforehand. If you recognise any of them, do not put it off:

  1. You have lost your keys or they have been stolen. If someone can link those keys to your address, your door is exposed. We explain this in detail in what to do if you lose your house keys.
  2. You are moving into a flat or business premises. You do not know how many copies previous tenants or owners made.
  3. The key goes in or turns with difficulty. It is the classic symptom of worn pins or built-up dirt, and it usually ends with the key stuck or snapped inside.
  4. There has been a break-in attempt. Even if they did not get in, the cylinder may be damaged inside.
  5. Too many copies are in circulation: ex-partners, employees, cleaning companies or holiday flat staff.
  6. Your cylinder is old and has no protection against bumping, picking, drilling or snapping.
  7. It sticks out from the lock guard or the door. A cylinder protruding by a few millimetres can be gripped and snapped with a tool.

Should I change the cylinder when moving into a new flat?

Yes, and it is one of the first things to do. Whether you are buying or renting makes no difference: the keys you are handed are not necessarily all the keys that exist. If you rent, the sensible thing is to discuss it with the landlord and keep the old cylinder so you can put it back at the end of the tenancy if that is what you agree.

In 1960s, 1970s and 1980s blocks in the west of the city (Cruz de Humilladero, Carretera de Cádiz or La Unión) we still find many original cylinders, or ones changed decades ago, with simple flat keys that can be copied anywhere. They did their job in their day, but they do not stand up to today's most widespread entry techniques.

How does salt air on the coast affect the cylinder?

Much more than you might think. In homes close to the sea, such as in Huelin, along the Paseo Marítimo, in Rincón de la Victoria or in Torremolinos, the salty air corrodes the springs and pins inside. The result is a key that gets harder to turn until one day it will not go in or it snaps.

To slow this down, it helps to clean the cylinder with a dedicated dry lubricant (not cooking oil or products that attract dust) and, when you change it, to choose a model with good corrosion resistance. In second homes left shut for months, it is common to find the cylinder seized when the owners come back in summer.

Which cylinder should I choose when I change it?

The benchmark is the UNE-EN 1303 standard, which grades cylinders on several criteria: durability, corrosion resistance, key security and attack resistance. The higher the grade for key security and attack resistance, the harder it is to open without the original key.

ProtectionAgainst whatWhat it does
Anti-bumpModified keys that are tappedSpecial pins that do not separate when struck
Anti-pickPin-by-pin manipulationPins with shapes that confuse the tool
Anti-drillDrilling through the plugHardened steel inserts
Anti-snap or anti-extractionSnapping or pulling out the cylinderA controlled break line that keeps the lock secured
Key with ownership cardUnauthorised copiesCopies only made on presenting the card

We work with manufacturers such as Tesa, JMA, Azbe, Cisa, FAC, Abloy and ABUS, and choose the model according to the door, the lock and the level of risk. If you want to understand the most common technique used against cylinders, read what lock bumping is and how to prevent it.

Change the cylinder or the whole lock?

In most cases the cylinder is enough. If the lock works well, the bolts come out without forcing and the case is not damaged, changing just the cylinder is sufficient and cheaper. However, it is worth replacing the whole lock when:

  • The internal mechanism is broken or the bolts only go halfway.
  • The lock is so old it will not take current euro profile cylinders.
  • You want to go from a single locking point to several.

For these cases there is our lock replacement service. And if the cylinder is going to be exposed, the natural complement is a lock guard; we look at whether it is worth it in armoured lock guard: is it worth it?.

When should I call a locksmith to change the lock cylinder?

Call as soon as one of the signs above appears, especially if you have lost keys or moved home: every day with the old cylinder is a day with copies you cannot account for. A locksmith measures the door, makes sure the new cylinder sits flush with the lock guard and hands you the new keys there and then. You will find the details on our lock cylinder replacement in Málaga page, or you can call us for advice on the model that best suits your door.

Frequently asked questions

How often should a lock cylinder be changed?

There is no fixed interval. It is changed when you lose keys, move home, the key is hard to turn or the cylinder lacks modern protection. A well-maintained quality cylinder lasts many years, but an old one can be insecure even if it still works.

Can I change the lock cylinder myself?

Technically, yes, but you need to measure both halves of the cylinder accurately, remove the fixing screw and make sure the new one does not stick out. A badly sized cylinder is exposed to snapping and cancels out much of the security you have paid for.

Does changing the cylinder mean changing the lock?

No. If the lock is in good condition, the cylinder is replaced without touching the lock case or the door. The whole lock is only changed when it is broken or will not take modern cylinders.

What should I do if the key is very hard to turn?

Do not force it or use cooking oil. Try a dry lubricant made for locks and, if nothing changes, have the cylinder checked as soon as possible: it is the warning sign before a key snaps inside.

Can several doors use the same key?

Yes. When the cylinders are changed you can order keyed-alike cylinders that open with the same key, which is handy for the front door and a back door or storage room.

Related services

24-hour emergencies

Need a locksmith in Málaga right now?

Call or WhatsApp us on 675 72 75 28. We reach any neighbourhood in Málaga, Rincón de la Victoria, Torremolinos, Alhaurín de la Torre and Cártama in 15-20 minutes, 24 hours a day.

CallWhatsApp