Open 24 h · We arrive in 15-20 minutes · 675 72 75 28Locksmiths in Málaga since 2015 · Based in Cruz de Humilladero
Service in Málaga · 24 h

Lock change in Málaga for homes, shops and residential buildings

We change mortice and multipoint locks, security door locks, metal shutter locks and building entrance door locks throughout Málaga city.

From €80Depending on the type of lock and door. We give you a fixed price before we start.

A lock change in Málaga is the answer when the whole mechanism is worn, has suffered an attempted break-in or no longer gives you the security you need. We come to your home, shop or building with our workshop van, check the door and, in most cases, leave the new lock fitted on the same visit.

Before replacing anything we tell you whether a repair or a lock cylinder change is enough, because the whole lock does not always need changing. We work with manufacturers such as Tesa, JMA, Azbe, Cisa, FAC and Abloy, and we fit everything from the traditional mortice lock to multipoint locks for security doors. Call us or send us a WhatsApp and we will advise you with no obligation.

Two multipoint locks from a security door taken apart during a lock replacement in Málaga
Multipoint locks taken apart during a lock replacement in Málaga · AYG Cerrajeros

When does the lock need changing and not just the cylinder?

If all you want is to stop some keys from working, a lock cylinder change is enough. The whole lock is changed when the problem is in the internal mechanism or when you want to step up the level of security.

  • The bolt or the latch does not come out properly: you have to push or lift the door for it to close.
  • Attempted break-in: the lock case is bent or has broken parts.
  • Rust and salt air: on outside doors, patios and areas near the sea, mechanisms corrode.
  • Discontinued model: there are no spare parts any more and any fault means replacing it.
  • You want more locking points: moving from a simple lock to a multipoint lock.

Mortice and surface-mounted locks

A mortice lock sits inside the edge of the door and is the most common type in flats in the city, especially in the 60s and 70s blocks of Cruz de Humilladero, Carranque or La Unión. Many of those doors still have their original lock, with decades of use. Swapping it for a new one of the same size is straightforward and does not mean touching the wood, and it is the ideal moment to fit a security cylinder as well.

A surface-mounted lock is fixed to the inside face of the door and is typical of old doors, patios, utility rooms and secondary entrances. It is also the basis of security deadbolts, which add a second, independent lock to a door that already has one.

Multipoint locks and security doors

Security doors and armoured doors have multipoint locks that lock into several points of the frame at once, spreading the load if someone tries to force the door. They are common in the developments of Teatinos, the villas of Puerto de la Torre and many refurbished flats in the centre. Each model has its own case sizes, rods and bolts, so we identify the make and model before ordering any part.

When a multipoint lock fails, we also check everything else: the alignment of the door with the frame, the hinges and the strike plates. A new lock fitted on a door that has dropped will soon give trouble again. If you want the highest level, armoured doors are classified under the UNE-EN 1627 standard according to their attack resistance, and we can advise you on which class makes sense in your case.

Metal roller shutters and shop locks

On Málaga's shopping streets, from the Centre to Huelin or Carretera de Cádiz, most shops lock up with a metal roller shutter. Its lock works out in the open, takes dust, damp and knocks, and is a frequent target for anyone trying to get in. We change central shutter locks, side locks and padlocks, and we can add protection so the lock is not left exposed.

We also replace locks on glass and aluminium doors in shops and offices, and if several people in the business have keys, we can set up a master key system so that each person only opens what they need to.

Building entrance doors in residential buildings

The building entrance door lock is the most used in the whole building: it opens and closes hundreds of times a day, often with a door closer that bangs it every time it shuts. In buildings with lots of keys in circulation, from tenants who no longer live there, couriers or former cleaning companies, changing the entrance door lock is a decision usually taken at the owners' meeting.

We work with property managers and presidents of communities of owners: we change the entrance door lock, the garage lock and the locks on shared rooms, adjust the electric strike if there is one and hand over the keys to share out among the residents. If the community wants to organise who opens each shared door, we can set up a master key system: one key for each resident and a master key for the property manager.

Repair or replace? How we decide

Our approach is simple: if the fault is in a specific part, a spring, a latch or the strike plate adjustment, it gets repaired; if the mechanism is worn out, corroded or has no spare parts, it gets replaced. And if the lock works but offers little security, we explain what you would gain by changing it so that you can decide.

The old houses of the Historic Centre are a special case: solid wooden doors with very old locks that are sometimes worth keeping for their value. There we look for solutions that respect the door and improve the locking without spoiling it.

After a break-in: change the lock without waiting

When someone has tried to force your door, the lock may still close and yet be damaged: the case bent, the latch out of place or the strike plate torn from the frame. If you leave it like that, it will give way sooner next time. The first step is to report it to the police and keep the marks if the insurer is going to send an assessor; then we leave the door locking securely, even if only temporarily, and plan the permanent replacement.

It is also a good time to rethink the whole door: a new lock with a security cylinder, an armoured lock guard and, if the door allows it, an extra deadbolt. On ground floor flats and street-level shops this combination makes all the difference against the most common break-in attempts.

Master key systems and restricted keys

If you are thinking of changing the lock, you may want to take the chance to get your keys in order. In rented flats, offices and homes where lots of people come and go, a master key system with restricted copy cylinders means each person only opens what is theirs and nobody can duplicate a key without the ownership card. If you only need to cancel some keys, a lock cylinder change is sometimes enough. We tell you which models suit your door and which are best avoided. For approximate prices of any change, see the prices page.

How we work

We check the door

We look at the type of lock, the condition of the frame and how the door is used, whether it is a home, a shop or a building entrance.

We tell you what is best

We explain whether a repair or a lock cylinder change is enough, or whether it is worth replacing the whole lock.

We fit and adjust

We fit the new lock, adjust the strike plates and hinges and check that it closes smoothly.

Frequently asked questions about lock change

How much does it cost to replace a lock in Málaga?

Lock replacement costs from €80. The final price depends on the type of lock (rim, mortice or multipoint), the model you choose and the condition of the door, and we give you a fixed price before we start. We give you an invoice.

How long does it take to change a lock in Málaga?

A standard mortice lock is changed in a short visit. A multipoint lock on a security door or a building entrance lock may take a little longer, especially if the door needs adjusting.

Do you have locks for any security door?

We work with brands such as Tesa, JMA, Azbe, Cisa, FAC and Abloy. We identify the model of your door and fit the compatible lock or a quality equivalent.

Do you change the lock on a metal roller shutter?

Yes. We change central and side locks on metal roller shutters for shops and garages, and we can fit protection so they are less exposed.

Do you work for residential buildings?

Yes. We change locks on building entrance doors, garages and shared rooms, and we coordinate the work with the property manager or the president of the community of owners.

Is it better to change the lock or just the cylinder?

If you only want to cancel some keys, the cylinder is enough. If the lock is failing, damaged or you want more locking points, it is worth changing the whole lock.

Do you work outside Málaga city?

Yes. As well as every neighbourhood in Málaga, we change locks in Rincón de la Victoria, Torremolinos and Cártama.

Areas

Lock change in your area

We offer this service throughout Málaga and in Rincón de la Victoria, Torremolinos, Alhaurín de la Torre and Cártama, with 24-hour emergency call-outs from our base in Cruz de Humilladero.

24-hour emergencies

Need a locksmith in Málaga right now?

Call or WhatsApp us on 675 72 75 28. We reach any neighbourhood in Málaga, Rincón de la Victoria, Torremolinos, Alhaurín de la Torre and Cártama in 15-20 minutes, 24 hours a day.

CallWhatsApp