Open 24 h · We arrive in 15-20 minutes · 675 72 75 28Locksmiths in Málaga since 2015 · Based in Cruz de Humilladero
Security

Lever Lock to Euro Cylinder: How to Convert It

Yes, a lever lock can be converted to a euro cylinder without replacing the door. Usually a conversion kit compatible with the lock is fitted, or just the lock body is swapped for a cylinder lock of the same size. A security cylinder and an armoured lock guard to protect it are then fitted.

Lever Lock to Euro Cylinder: How to Convert It

What is a lever lock and why is it falling out of use?

A lever lock (cerradura de gorjas) is the one with a long key and a bit at the end, which many people call a «double-bit key» or «safe key». For years it was the standard security lock on security doors in Spain, and many doors in Málaga's apartment blocks from the 80s and 90s still have one.

It works with a set of internal plates (the levers) that the key has to line up before the bolt can move. It is a robust lock, but it has three problems we see every day on emergency call-outs:

  • Key copies are expensive and slow. Many lever keys cannot be cut at just any key shop, and some only with the manufacturer's card.
  • If you lose your keys, the change is costly. With a cylinder you only replace the cylinder; with a lever lock you have to replace or recode the whole lock.
  • Opening techniques have moved on. Older lever locks without extra protection no longer offer the security they did twenty years ago.

Can you switch from a lever lock to a cylinder without replacing the door?

Yes, and that is the usual approach. There are two ways to do it, depending on the brand and model of the lock:

  1. Conversion kit. Many manufacturers offer a kit that replaces the lever mechanism with one designed for a euro cylinder. The lock case, bolts and door rods are all kept.
  2. Replacing the lock body. If there is no kit for that model, just the lock is swapped for a cylinder lock of the same dimensions (backset, faceplate and bolt positions), so it fits the existing cut-out in the door without any building work.

In both cases the door, frame and locking points stay as they are. What changes is the «brain» of the lock: it no longer works with a lever key and runs on a cylinder instead.

What are the advantages of a euro cylinder?

Lever lockSecurity euro cylinder
If you lose your keysThe lock has to be replaced or recodedJust replace the cylinder, in minutes
Key copiesExpensive and hard to findWith an ownership card; nobody copies your key without it
Anti-bump and anti-pick protectionDepends on the model and its ageIncluded in high-security cylinders
Future upgradesLimitedYou can move to a higher-grade cylinder whenever you like

A good security cylinder is anti-bump, anti-pick, anti-drill and anti-snap. If you would like to know more, we explain it in what lock bumping is and how to prevent it.

Do you need an armoured lock guard?

Yes, we always recommend one. The cylinder sticks out slightly from the door, and that is the part burglars try to snap or pull out. An armoured lock guard covers it and protects it against extraction, drilling and snapping. It is the combination we fit on almost every conversion: security cylinder + armoured lock guard. You can see the models under armoured lock guards.

What does the job involve and how long does it take?

  • Checking the lock: we look at the brand, model and dimensions to see whether there is a conversion kit or whether it is better to replace the lock body.
  • Fixed quote: we tell you the price before we start. If you send us a photo of the door edge and the key on WhatsApp, we can often give you an idea before coming out.
  • Fitting: we remove the lock, fit the kit or the new lock, install the cylinder and lock guard, and check that every bolt moves in and out properly.
  • Handover: we leave you the new keys with their copy card.

If we have the parts, the job takes one to two hours, with no building work and no mess.

When is it worth making the switch?

  • When you have lost a key or do not know how many copies exist.
  • When you move into a home with an old security door.
  • When the lever lock starts to fail: the key goes in badly, is hard to turn or gets stuck.
  • When you want to improve security without replacing the door.

If your key is stuck inside or the lock has jammed, the door needs opening first. We explain what to do in key broken inside the lock.

Want to convert your lever lock in Málaga?

At AYG Cerrajeros we do this job throughout Málaga, Rincón de la Victoria, Torremolinos, Alhaurín de la Torre and Cártama. Send us a photo of your lock and key on WhatsApp and we will tell you whether it can be converted and how much it costs. You can see the service under lock changes or lock cylinder replacement.

Frequently asked questions

Do I need to replace my security door to fit a cylinder?

No. Only the lock mechanism is changed, either with a conversion kit or with a cylinder lock of the same dimensions. The door, frame and bolts stay as they are.

Do all lever locks have a conversion kit?

Not all of them. Many brands offer one for their most common models. If yours does not, the lock body is replaced with a cylinder lock that fits the same cut-out.

Is a cylinder lock more secure than a lever lock?

With a high-security anti-bump cylinder and an armoured lock guard, yes: it is as secure as, or more secure than, an old lever lock, and far more practical if you lose your keys.

How long does a lever lock to cylinder conversion take?

If we have the parts, between one and two hours. No building work is needed.

How much does it cost to convert a lever lock?

It depends on the brand and model of the lock, and whether a conversion kit exists. Send us a photo on WhatsApp and we will give you a fixed price before we start.

Related services

24-hour emergencies

Need a locksmith in Málaga right now?

Call or WhatsApp us on 675 72 75 28. We reach any neighbourhood in Málaga, Rincón de la Victoria, Torremolinos, Alhaurín de la Torre and Cártama in 15-20 minutes, 24 hours a day.

CallWhatsApp